Material Characteristics of Polycarbonate Solid Sheet
Impact resistance: The impact strength of the Polycarbonate Solid Sheet is extremely high, which is 250-300 times that of ordinary glass. The same thickness of acrylic plate 30 times, tempered glass 2-20 times. It has the reputation of “unbroken glass” and “ringing steel”.
Light transmittance: up to 89% light transmittance, comparable to glass. And long-term exposure will not produce yellowing, atomization and other phenomena.
UV protection: One side is co-squeezed with an anti-ultraviolet (UV) coating. Can effectively block ultraviolet light through, protect valuables from ultraviolet damage.
Flame retardant: belongs to the refractory material (B1 class), its own ignition point is high, and will not produce toxic gases when burning.
Light weight: the specific gravity is only half that of glass. Easy to transport, install and support.
Strong plasticity: according to the design drawing in the field using cold bending or hot bending, installed into arch, semicircular and other styles.
Sound insulation: The sound insulation effect is better than the same thickness of glass and Addison plate.
Temperature adaptability: No cold brittleness at -40 ° C, no softening at 125 ° C. It is suitable for all kinds of harsh environments.
Application Field of Application field of Polycarbonate Solid Sheet
Construction industry: canopy, carport, waiting shed, greenhouse, modern ecological restaurant ceiling, etc.
Advertising and exhibition: advertising street signs, light box advertising, display exhibition layout.
Industrial manufacturing: instruments, meters, high and low voltage switchgear panel, LED panel, etc.
Transportation facilities: Noise barriers on highways and urban viaducts.
Agriculture: agricultural greenhouses, breeding greenhouses, etc.
Home improvement industry: wall, top, screen, etc., in advanced interior home improvement.
Installation and Precautions
Installation method: Polycarbonate Solid Sheet commonly used screws or rivets perforated installation. Workers should note that the opening hole aperture of the plate is 50% larger than the diameter of the bolt or rivet. This allows room for thermal expansion and contraction.
Note:
When installing, avoid directly opening holes and fixing screws or rivets at the same time, so as not to reserve space for thermal expansion and cold contraction.
The spacing between holes and holes should be moderate, not too large or too small.
Screw should not be too tight, so as not to fracture the plate.
During cold bending, avoid fixing the bent part with screws.
Avoid contact with organic solvents and the glue and paint composed of them during installation.
Contact with us today!
