Seamless steel pipe under the same weight, its strength is much higher than other materials. This high strength characteristic allows it to be used in high pressure and heavy load stress environments, such as manufacturing high-strength mechanical parts. At the same time, this pipe also has good toughness, can effectively resist low temperature shock and vibration load, adapt to extremely harsh environment.
Sizes of Seamless Steel Pipe | IBC
Out diameter: 1/2 inch – 36 inch (21.3mm-914.4mm)
Thickness: 2.11mm-60mm ( SCH10, SCH20, SCH40, SCH80, STD, SCH120, SCH160, XXS)
DN: 15, 20, 25, 32, 40, 50, 65, 80, 90, 100, 125, 150, 200, 250, 300, etc.
Inch: 1/2’’, 3/4’’, 1’’, 1.1/4’’, 1.1/2’’, 2’’, etc.
ASME: 21.3, 26.7, 33.4, 42.2, 48.3, 60.3, 73, 88.9, 101.6, 114.3, 141.3, etc.
SCH10: 2.11, 2.77, 3.05, 3.4, 3.76, 4.19, 4.57, 6.35, etc.
SCH20: 6.35, 7.92, 9.53, 12.7, etc.
SCH30: 2.41, 2.9, 2.97, 3.18, 4.78, 7.04, 7.8, 8.38, 9.53, 11.13, etc.
STD: 2.77, 2.87, 3.38, 3.56, 3.68, 3.91, 5.16, 5.49, 5.74, 6.02, 6.55, etc.
Production Procedure 1
1. Material selection and preparation: First of all, according to the specifications and requirements of this steel pipe, select the appropriate round tube blank as the raw material. The round tube billet needs to undergo strict inspection to ensure that its quality meets the standard.
2. Heating treatment: Put the selected round tube blank into the heating furnace, and heat it to the required temperature by electric induction heating, gas heating, etc. The purpose of heating is to eliminate the stress inside the round tube blank and improve its plasticity, so as to facilitate subsequent processing and forming.
3. Perforation molding: the heated round tube blank is sent into the perforating machine, and the round tube blank gradually forms the initial embryo of seamless steel pipe through the rotation and pushing of the tool. This step requires a high degree of skill and experience to ensure the quality and dimensional accuracy of the finished product.
Production Procedure 2
4. Rolling: The initial embryo after perforation needs to be further rolled multiple times, through three roller skew rolling, continuous rolling, etc. So that it gradually becomes the steel pipe of the required specifications and shapes. In the rolling process, it is necessary to strictly control the temperature and rolling force to ensure the quality and performance of the steel pipe.
5. Sizing and straightening: After rolling, this steel pipe needs to be calibrated by the sizing machine to achieve the size and accuracy of the standard requirements. Then, the steel pipe after sizing is straightened to eliminate its bending and distortion and ensure the straightness of the steel pipe.
6. Cooling and pickling: The straightened steel pipe needs to be cooled so that it can reach the required temperature. Then, the surface of the steel pipe is pickled to remove impurities such as oxide and rust on the surface and improve the surface quality of the steel pipe.
7. Inspection and marking: Strict inspection of the finished steel pipe, including inspection of size, appearance, performance and so on. After qualified, the steel pipe is marked to facilitate subsequent installation, construction and use.
Why IBC Metal Group
As a key industrial product, the quality and performance of seamless pipe are very important. Therefore, a company that can provide high-quality, high-performance seamless pipes will naturally be favored by the market. IBC Group has advanced production technology and strict quality control system to ensure the stability and reliability of products.
Secondly, price is also an important factor affecting customer choice. IBC Group is able to offer competitive prices, so it has greater appeal in the market. This is due to factors such as the company’s cost control ability, production efficiency and economies of scale.
In addition, service is also an important consideration in customer selection. IBC Group can not only provide quality products, but also provide perfect services, including pre-sales consultation, after-sales service, technical support and so on. This earned the trust and satisfaction of the customer.
![ASME SA204 Pressure Vessel Plates](https://tjibc.com/wp-content/uploads/2023/03/ASME-SA204-Pressure-Vessel-Plates-6.jpg)
Contact with us today!